It's like the soles of your work boot... it's sprayed onto
your truck bed up to 1/4" thick.
| Texture |
|
LINE-X exhibits the highest tensile strength, the highest
tear strength, and the highest abrasion resistance than any other spray-in liner
available. This makes LINE-X the highest
performing bed liner.
LINE-X is a two part polyurethane elastomer system. It uses equal parts of an "A" component or hardener
and a "B" component or resin. When combined properly it produces a polyurethane elastomer similar to the bottoms of your work
boot.
The two liquid components are brought together (using special equipment) at the tip of the spray gun. LINE-X cures
or "sets up" in 3 to 5 seconds, giving it an immediate set time.
• 100% bond to virtually any surface.
• Best looking.
• Environmentally
safe - no VOCs or CFCs, 100% solids.
• EPA exempt.
• 80%+ physical properties to -50°
• Withstands
temperatures as high as 350° +
Adds Value to New & Older Trucks
A LINE-X bed liner is a great way to add resale value, whether you spray it on a well used or a new truck bed.
According to the NADA* "Official Used Car Appraisal Guide" a LINE-X bed liner adds $225 in trade-in value to your truck.
(*National
Auto Dealers Association - Sept. 5, 2000 edition)
The skid resistant LINE-X surface helps to hold loads in place. Plus,
it won't tear or rip like other "soft" spray on bed liners.
|
How It's Done - 5 STEPS
1. On a clean, dry truck, the bed is masked as if it is to be painted.
2. The entire truck is covered to protect from overspray.
3. The bed is wiped with a grease and wax remover, scuffed...and
it's spray time!
4. Sprayed on, it dries in 3-5 seconds. It's
ready for
heavy use (shoveling out gravel)
in 24 hours. LINE-X is a thick spray on bed liner.
(Spray suit is for overspray only)
5. Immediately after spraying, the truck is unmasked.
From start to finish it took less than 2 hours to complete
the job. The truck is ready for use immediately - even in the rain or cold, without affecting the bed liner. We recommend
24 hours "set time" before placing heavy object on the bed.
|
